Type A Type B |
Technical Parameters
Rated voltage: 220V
Voltage withstand voltage: 1.5kv
Insulation resistance: > 5MΩ
Insulation material: (silicone rubber)
Ambient temperature: -60 ℃ - +250 ℃
Operating temperature: 0-150 ℃
Display mode: Heating temperature - red LED,
Set temperature - green LED
Sensor: Type K thermocouple or PT100
Main Feature
1. Electric heating plate power section decreases. - control the filter temperature difference caused by excessive temperature above or below the condensation or over-temperature damage.
2. Built-in over-temperature circuit breaker (heating temperature exceeds 140 ℃) - to prevent instrument failure \ line fault abnormal temperature damage filter.
3. Electric heating sleeve using porous polymer insulation - full energy saving, heating the outer surface of the set at room temperature.
4. Stereotyped magic sticky buckle design, Teflon coated - easy to disassemble, install.
5. intelligent double-three display temperature control system, heating temperature can be adjusted at 0-150 ℃.
Applications
Pure water tank, injection water tank, ingredients tank and other products of the respirator to prevent heat insulation filter to form condensed water.
Freeze-Dryer Gassing Filter - Removal of Condensate after Steam Sterilization Residual or Integrity Tested Moisture
Raw materials and finished liquid filter heating insulation filter drying and so on.
Order Information
Product Code |
Heater Jacket |
Length |
Power |
Operating Temperature |
TSA05SBTZ |
Type A |
5" |
150 W |
≤150℃ |
TSA10SBTZ |
10" |
200 W |
||
TSA20SBTZ |
20" |
400 W |
||
TSB05TBTZ |
Type B |
5" |
100 W |
≤150℃ |
TSB10TBTZ |
10" |
200 W |
||
TSB20TBTZ |
20" |
400 W |
Welcome to wholesale high quality teflon vent filters from Tanvi Filtering which is well-known as one of the leading manufacturers in China. Our factory have been engaged in offering special filtering products with high security, reliable performance and high filtering accuracy for over 8 years. Now, take action wholesale cheap our products.